Daystate Huntsman Regal HuMa Regulator - Internal - DIY Fit

Daystate Huntsman Regal HuMa Regulator - Internal - DIY Fit

This is for a DIY fit HuMa internal regulator for your Daystate Huntsman Regal, it is only suitable for 12ftlbs/16j models, not FAC/export models. It is best suited to people who have rifles with a 2 piece air cylinder/hammer tube, it is not recommended for the older one piece models. The DIY fit model is useful if you do not want to post the complete action or cylinder, you are familiar with the workings of your rifle and you know how to adjust the power. If in doubt about the best way to set up your rifle and fit the regulator, please seek the advice/services of a professional. 

Because this regulator fits inside the air cylinder it makes no difference to the overall length of the air cylinder or the looks of the rifle. It does not involve drilling a breather hole in the air cylinder, like some other regulators on the market. You will need to ensure the inside of the air cylinder is well polished to allow the regulator O rings to seal properly. The rifles' pressure gauge will also read regulator pressure, not cylinder pressure. 

Before ordering a regulator, please make sure you have made yourself familiar with the fitting instructions, you are able/happy to carry out the necessary work and you are able to adjust your power to keep your rifle legal. There are no printed fitting instructions sent with the regulator. There are also links to the fitting instructions on the fitting instructions page of the website. 

Huntsman & Wolverine fitting instructions. pictorial guide.

This video is currently unedited but it should give you a pretty good idea of how to fit a HuMa regulator to your Daystate >>here<<

For more details about the regulator have a look on the HuMa Air website.

You will need access to a chronograph to set your power after fitting the regulator.

Please do not exceed the legal limit for your country.

Regular price £85.00 Sale price £72.00