Convert BSA R-10 to FAC

This is a quick information page I have put up about converting the BSA R-10 to FAC because I get asked this question a lot. I will edit it and tidy it up as soon as I get some free time...

There are a few options when it comes to up-rating the sub 12ftlbs R-10 to FAC:

- keep the standard barrel (assuming it is the 15" barrel, I don't recommend a 12" barrel for FAC) and make the changes to the internals, uprate and replace the regulator with a HuMa regulator and X-Tune etc. This will not allow you to get the same max power and shot count as the full FAC spec rifle because shorter barrels are less air efficient.

- upgrade the barrel to 18.5" FAC length, change the internals, fit a HuMa regulator and X-Tune etc. This would then make it the same spec as the proper FAC R-10 but with a better regulator.

I'm just enquiring about tuning my bsa r10 SE, is it possible to convert it from sub 12ft lb to fac. Yes but you need to consider the pros and cons. When you convert a sub 12ftlbs rifle to FAC you devalue it because the second hand FAC airgun market is very poor/slow. You would probably have change in your pocket if you traded in/sold your sub 12ftlbs R-10 and bought a second hand FAC R-10 (or other make). The full FAC spec R-10 has an 18.5" barrel and some internal modifications to get it to max 30ftlbs (a lot less with a .177). If you want the full FAC spec it would mean changing your barrel and the internals, which means your shroud will no longer fit. If you wanted to keep your existing barrel and shroud then you could probably get 25-26ftlbs (a lot less with a .177) out of it but the internal modifications still need to be carried out. If you are wanting more power than 30ftlbs in .22 then you will need to consider a different brand of rifle.

Will you tune my R-10 slightly higher and if so how high? 12ftlbs is the legal limit if it is not an FAC, I tend to set rifles around 11.5ftlbs, which gives a little leeway for temperature changes, the rifle bedding in etc. 

I find 11.6ftlb just not enough power. I am not sure exactly the reason is you are not happy with 11.6ftlbs, you don't mention what sport/discipline you shoot/use your rifle for and what ranges you shoot out to? I know people who target shoot out past 80 yards with sub 12ftlbs rifles and most people shoot competitively out to 45 yards (HFT) or 55 yards (FT). With good field craft hunters are very effective with sub 12ftlbs rifles. It is just a case of learning your trajectory and knowing your ranges (a laser range finder is very useful). You will still get a loopy trajectory with an FAC rifle. 

What do I need to do if I want to go ahead? I would need to see your FAC, with a free slot for the R-10 available on it before doing the work. The rifle will also need to be collected from me once converted or it can be sent to your local RFD for collection. They may charge for this service because they will have to do the paperwork before handing your rifle back to you. You would also need to book a tuning slot via the eShop on my website.

Can I fit an FAC rated HuMa regulator to my R-10 to make it FAC? No, fitting an FAC rated R-10 regulator to a standard R-10 will actually reduce the power of the rifle. A number of parts in the rifle need to be modified to make it an FAC rifle.