EdGun Leshiy HFT - DIY fit HuMa regulator kit
Made by special request for the HFT and UK shooters. Huma Air in close cooperation with Airborne Arms NZ, developed this tune kit for the Edgun Leshiy to convert your rifle into a 12 ft/lbs (16 Joule) HFT version with an enormous shot count.
Our kit contains the HuMa micro regulator, a special plenum with a matching valve return spring, a power sleeve and a new softer hammer spring.
The kit is specially designed for .177 but also works fine for .22 and it is capable of providing you a huge shot count with the highest shot to shot consistency. (see the shot strings above)
The benefits of the Edgun Leshiy regulator tuning kit:
- Huge increase in shot count
- Easy to adjust due to the pressure scale, you do not need to guess the pressure
- This regulator comes set for the low pressure range of 60-120 bar
- Excellent consistency
- Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations
- Tested in .177 and .22. (no test data for .25 available yet)
- Maximum power for this model is tested @ 21 ft/lbs in .22
When you order your Wdgun Leshiy 12ft/lbs Tuning Kit you will receive:
- Your regulator preset on to your own wishes;
- A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment.
- A delrin power sleave
- A new valve return spring
- A new hammer spring
- A “Huma regulated” breech sticker
If you want to do some more tuning; the regulator has a clear pressure scale so you can easy adjust it to your wishes. These regulators are also vented to the atmosphere without any modification to your pressure tube needed so no creeping up in power.
This Edgun Leshiy regulator model is deveopped and tested in cooperation with Wingman of Airborne Arms NZ. Check his results and fitting instruction in this direct link to video
Not every rifle is identical and you might try some different setups to get the best results.
PLEASE NOTE: the shot strings were recorded by "Wingman" of Airborne Arms. He is a skilled tuner and spent a lot of time in finding the best performance for his Leshiy. He used a 300 bar fill pressure. Please check your rifle's owner manual for your maximum fill pressure.
His instruction video will give a good indication his setup, how to tune and adjust your rifle for the best performance. You do need some skills in adjusting your hammer spring tension and regulator pressure combination, to get it 100% correct.
Beside the Gen1-Gen2 differences, there are also some different strengths/types of hammer springs used in some Leshiy rifles. These rifles might need a slightly different setup, which means the performance may vary. Please have a look at this >>page<< to see what some other users have done when setting up their rifles.
Extra guides how to set up a regulated rifle and how to adjust the regulator pressure properly
Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use Belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle with less than 1% difference.
Before ordering a regulator, please make sure you have made yourself familiar with the fitting instructions on the "Fitting Instructions" page on the website and the video guides above, you are happy to carry out the necessary work and you are able to adjust your power to keep your rifle legal. No fitting instructions are provided with the regulator.. You will need access to a chronograph to set the power once the regulator has been fitted.
Please do not exceed the legal power limits for your country/state.