BSA Stainless Steel Pellet Probe/Bolt
This is an after-market pellet probe/bolt for a BSA PCP. It can be fitted to your rifle while it is here being worked on or you can buy one and fit it yourself.
There are .177/4.5mm and .22/5.5mm single/multi-shot, left/right hand probes available from the eShop. Please select the correct version to fit your rifle.
These came about because the standard nickel plated BSA pellet probes have a tendency to flake/peel, leaving little silver flakes in your action, which can cause problems in the long run and the bolt can be rough when cocking.
These probes are guaranteed not to flake or peel. They also come with a pellet probe O ring already fitted.
Please note these probes do not come with fitting instructions, they are a replacement part. By buying it, it is assumed you know how to fit it. It is recommended that the banjo bolt is tightened to 1-1.2N m and it is advisable to use a drop of medium strength thread lock on the banjo bolt to stop it working loose in use. This video shows how to replace the probe on a multi-shot rifle >>here<<
The picture shows a .177 and .22 probe, you are only buying one probe of the actual calibre and hand you order from the menu.