Air Arms fill valve tool

XTX Air
AA FILL TOOL

This is a handy tool to help you remove the fill valve body from your Air Arms S400, S410, S510, EV2, TDR, FTP900, Ultimate Sporter air cylinder. It is used to hold the fill valve body so that you can unscrew it for maintenance/repairs because they can be very tight. It can also be used to hold the fill valve body so that you can use a 10mm spanner to remove/fit the T bar fill valve for servicing.

It is not suitable for the S200/CZ 200, I have different tools for these models in the S200 section of the eShop.

The tool has been designed to fit over the T bar fill valve. You can then clamp the tool in a vice or use a large adjustable spanner etc to unscrew the ends of the cylinder. The flats on the tool measure around 27mm or 1.063". The tool has 3 sets of holes, set at different distances apart, to cater for all known Air Arms fill valve bodies. It comes with removable pins that can be moved between the different holes to suit different rifles.

The tool is made from stainless steel, but it is not completely rust resistant, so it will need to be kept dry and oiled if you do not want it to rust.

Use it at your own risk!

There is a video on the XTXair YouTube channel showing the original tool in action, the current version works in the same way but it has 3 different PCD options.

View Product Video

Earn 0 reward points
£0.00 £12.50
QTY:
Out Of Stock
Add To Wishlist

Want to be notified when this product is back in stock? Complete the form below and we'll send you an email when it is.

The item has been added to your basket

Continue Shopping
Proceed To Checkout